CARPRO | Hydr02 Foam Soap & Sealant in One CarPro

In the tradition of our HydrO2 line HydrO2Foam was formulated with Hydrophilic glass fibers, fluoropolymers and can be applied to all solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam. This amazing rich foam wash and sealant in one lifts the dirt whilst in the Merino wiping stage and then during the rinse phase an ultra-water-repellent coating is immediately formed!

This results in a durable silica shell that produces a brilliant protected shine that is incredibly easy to maintain. Our “Hydroelectric bonding ” function means the pressure from spraying with water accelerates the bonding of the glass like shell to the surface creating a unique glossy coat that is resistant to nearly all acids, alkaline solutions, and solvents while offering significant UV protection.

Features:  

• Wash and High Gloss sealant in one!
• pH Neutral  
• Gently lifts dirt
• Enhances the gloss, depth, and smoothness of your paint
• Easy to use
• Versatility: Use on many surfaces
• Dirt and Water repellency: Dirt and water are repelled from the surface
• Instant Vehicle Release: No cure time needed
• Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches.  
• UV Protection
• Resistant to nearly all acids, alkaline solutions, and solvents  
• Gloss and Hydrophobic durability of 3 months or more  

Precautions:

• Do not apply HydroFoam in the sun or to a hot surface.
• In shaded location rinse the vehicle of all grit

Directions with Foam Cannon:

1. Dilute 1:9 in Foam Cannon
2. Foam surface (Do NOT allow to dry on surface)
3. Wash with mitt (as usual) rinsing after each panel
4. When vehicle is finished rinse entire vehicle very well
5. Remove any remaining water with Microfiber Madness Dry Me Crazy or Dry Me Crazy Jr

Directions by Hand:

1. Rinse vehicle  
2. Spray HydroFoam (diluted 1:9) from a spray bottle onto panel(s)  OR  apply small amount directly to wet mitt and spread
3. Wash with mitt (as usual)
4. Rinse mitt and panel(s)
5. Move to next panel(s) and repeat steps 2-4
6. Rinse the entire vehicle well
7. Dry any remaining water by blowing off and or with Microfiber Madness Dry Me Crazy towel